PD - Βύσμα Λεπτότοιχων Υλικών

The expansion plug for fixings in gypsum plasterboard, gypsum fibreboard and wooden panels.

Κωδικός PD


	Κατάλληλο για:
	Γυψοσανίδες και γυψοϊνοσανίδες, Μοριοσανίδες (Νοβοπάν), Ξύλινες σανίδες, Ξυλόπλακες , Σανίδες MDF, Σανίδες κόντρα πλακέ, Σανίδες κόντρα πλακέ με ξύλινο πυρήνα, Συνθετικές σανίδες πολλαπλής πλέξης .

	Εφαρμογή σε:
	Ελαφρά ερμάρια λουτρών, Ερμάρια καθρεφτών, Ηλεκτρικοί διακόπτες, Κλειδοθήκες, Κορνίζες, Μικρά επιτοίχια ράφια, Πετσετοκρεμάστρες, Ράφια, Σιδηρόδρομοι κουρτινών, Σοβατεπιά, Φωτισμοί, Φωτιστικά σώματα.

0,00 € με ΦΠΑ: 0,00 €

Πατήστε στην εικόνα για μεγένθυση

Approvals Board fixing PD

0,00 € με ΦΠΑ: 0,00 €

Ποσότ.:

Περιγραφή

Conical expansion fixing for board materials from 8 mm thickness
When the screw is tightened, the plastic cone is pulled into the sleeve and expands the fixing.

Advantages/Benefits

Pre-formed internal thread for chipboard screws for easy and quick screwing in.
High tightening torque improves the setting feeling (the fixing „tightens firmly“).
The fixing grips in thin boards by a mechanical interlock, and in thick boards by expansion force.
Undercut-like mechanical interlock enables high grip in board materials.
No special installation tool necessary.
Short expansion zone for applications with little space required behind the board.
Several longitudinal ribs reliably prevent the PD fixing from rotating in the hole.
Small but stable collar prevents the fi xing from slipping further into the hole.
Tip: also reliable in solid building materials.
The operating principle of the fixing allows for use in various board thicknesses, including in low cavity depths. This provides great flexibility.
The special fixing geometry with a nylon cone ensures a high tightening torque that can be identified immediately. This offers a high level of installation safety.
The longitudinal ribs prevent the fixing from rotating in the drill hole, thus allowing for a reliable installation.
The board fixing PD can be used with the most wide-ranging screws, hooks and eye screws. This allows for a broad range of applications.

Τεχνικά Δεδομένα

Ελάχιστο βάθος τρύπας διαμέσου υλικού στερέωσης td	:	-
Ελάχιστο πάχος επιφάνειας	:	-
Μήκος αγκυρίου l	:	-
Ξυλόβιδα [ds x ls]	:	-
Μέγιστο πάχος υλικού στερέωσης tfix	:	-

Εγκατάσταση

The board fixing PD is suitable for pre-positioned installation.
Use rotary drilling to create the drill hole.
When the screw is tightened, the plastic cone is pulled into the sleeve and expands the fixing.
Use full-thread screws, or alternatively, the part of the screw without thread may not be longer than the thickness of the item being attached.
Do not use screws with double-start threads.